3-in-1 Handheld Laser Welding, Cleaning & Cutting Machine
A 3-in-1 laser welding, cleaning, and cutting machine is a handheld fiber laser system that combines three metalworking functions in one portable unit. Prices range from $2,800 (1000W) to $4,500 (3000W) factory-direct. Powered by JPT fiber laser sources, it welds metals up to 8mm, cuts sheet metal up to 6mm, and cleans rust, paint, and oxide — all by switching nozzles on the same handheld gun. Chihalo manufactures these machines since 2016 and ships factory-direct to 30+ countries with a 2-year warranty.
Hi! I am Dawn. With 10 years of field experience, I specialize in laser cleaning systems—from optical sourcing to automation. I write here to turn complex specs into actionable buying guides.
Table of Contents
KEY TAKEAWAYS
- Price:$2,800–$4,500 factory-direct (30–40% below Western dealers)
- Power options:1000W, 1500W, 2000W, 3000W (JPT fiber laser source)
- Welding capacity:Up to 8mm stainless steel, 6mm aluminum (with wire feed)
- Cutting capacity:Up to 6mm carbon steel, 4mm aluminum (3000W)
- Cleaning width:Up to 80mm per pass
- Learning curve:Most operators produce quality welds within 1–2 hours
- Included:Machine, welding gun, wire feeder, cleaning & cutting nozzles, safety gear, 2-year warranty, lifetime tech support
Quick specs card:
- Laser source: JPT CW fiber laser
- Power: 1000W / 1500W / 2000W / 3000W
- Welding gun weight: ~750g
- Fiber cable: 5m (10m optional)
- Cooling: Air-cooled
- Voltage: 110- 220V (1000W–2000W) / 380V (3000W)
- Machine weight: 35 kg (varies by power)
- Welding modes: 9 oscillation patterns
What Can a 3-in-1 Laser Machine Do?
A 3-in-1 handheld laser machine replaces three separate tools with one portable unit. You switch between welding, cleaning, and cutting by changing nozzles and selecting the mode on the touchscreen controller — the changeover takes about 30 seconds.
Here is what each function delivers in real-world use.
Laser Welding
The primary function. The CW fiber laser delivers a continuous beam through a handheld gun with dual-axis wobble technology. The beam oscillates in 9 different patterns (linear, circular, triangle, figure-8, and more), which widens the effective weld seam to 0–5mm and bridges gaps that would defeat a static beam.
Weldable materials:
- Stainless steel (all grades) — up to 8mm with wire feed
- Carbon steel — up to 8mm
- Aluminum alloys (6061, 5052, 1100) — up to 6mm, argon shielding required
- Galvanized steel — works well, zinc vaporizes during welding, proper ventilation mandatory
- Copper and brass — doable at 2000W+, challenging due to reflectivity
- Titanium — excellent results with argon shielding
Performance data (2000W unit, tested in-house):
- Weld speed on 2mm stainless: 18–24 inches/minute (4× faster than TIG)
- Weld strength: 93–98% of base material tensile strength
- Heat-affected zone: 0.3–0.5mm (vs 3–5mm for TIG/MIG)
- Post-weld grinding required: None for most cosmetic applications
Honest assessment: Laser welding excels on material from 0.5mm to 6mm. It produces clean, fish-scale welds with zero post-processing on thin to medium gauge metal. For material over 8mm, you still need traditional arc welding methods.
Laser Cleaning
Switch to cleaning mode by attaching the cleaning nozzle. The laser vaporizes rust, paint, oxide layers, oil, and welding discoloration without touching the base metal.
Two primary cleaning workflows:
- Pre-weld cleaning— Remove rust, oil, and oxide from the weld zone before welding. Clean surfaces produce welds with less than 1% porosity (vs 5–10% on uncleaned surfaces).
- Post-weld cleaning— Strip welding discoloration and oxidation for a polished finish. Eliminates the need for chemical passivation on stainless steel.
Cleaning specifications:
- Cleaning width: up to 80mm per pass
- Cleaning speed: 10–30 m²/hour (varies by contamination level)
- Effective on: rust, paint, powder coating, oil, grease, oxide layers, welding discoloration, rubber residue
- No consumables, no chemicals, no abrasive media
Can it replace a dedicated laser cleaner? For pre-weld and post-weld cleaning — yes, completely. For large-area industrial cleaning (ship hulls, factory floors, heavy industrial descaling), a dedicated high-power CW cleaning machine will be faster and more efficient. The 3-in-1 cleaning function covers 80%+ of typical fabrication shop cleaning needs.
Laser Cutting
Attach the cutting nozzle and increase power density. The beam vaporizes metal along a precise path, producing clean cuts with minimal kerf.
Maximum cutting thickness by power:
Power | Stainless Steel | Carbon Steel | Aluminum |
1000W | 2mm | 2mm | 1mm |
1500W | 3mm | 3mm | 2mm |
2000W | 4mm | 4mm | 3mm |
3000W | 6mm | 6mm | 4mm |
Honest assessment: The cutting function is for trimming, notching, and on-site cuts — not for replacing a dedicated fiber laser cutting table or plasma cutter. Think of it as a precision tool for when dragging out the plasma cutter is not practical. For straight production cutting of sheet metal, invest in a dedicated cutting machine. For field work, adjustments, and quick trims, the 3-in-1 cutting mode saves real time.
Technical Specifications
Specification | 1000W | 1500W ★ | 2000W ★ | 3000W |
Laser source | JPT CW | JPT CW | JPT CW | JPT CW |
Laser power | 1000W | 1500W | 2000W | 3000W |
Wavelength | 1070±10nm | 1070±10nm | 1070±10nm | 1070±10nm |
Max weld thickness (steel) | 3mm | 5mm | 6mm | 8mm |
Max weld thickness (aluminum) | 2mm | 3mm | 5mm | 6mm |
Max cut thickness (steel) | 2mm | 3mm | 4mm | 6mm |
Max cut thickness (aluminum) | 1mm | 2mm | 3mm | 4mm |
Cleaning width | Up to 60mm | Up to 70mm | Up to 80mm | Up to 80mm |
Welding speed | 0–120mm/s | 0–120mm/s | 0–120mm/s | 0–120mm/s |
Wobble welding modes | 9 patterns | 9 patterns | 9 patterns | 9 patterns |
Wire feed diameter | 0.8/1.0/1.2mm | 0.8/1.0/1.2/1.6mm | 0.8/1.0/1.2/1.6mm | 0.8/1.0/1.2/1.6mm |
Fiber cable length | 5m (10-15m opt.) | 5m (10-15m opt.) | 5m (10-15m opt.) | 5m (10-15m opt.) |
Cooling system | Air-cooled | Air-cooled | Air-cooled | Air-cooled |
Power supply | 220V/50Hz | 220V/50Hz | 220V/50Hz | 380V/50Hz |
Welding gun weight | ~750g | ~750g | ~750g | ~750g |
Machine weight | ~35 kg | ~35 kg | ~35 kg | ~30 kg |
Control interface | 7″ touchscreen | 7″ touchscreen | 7″ touchscreen | 7″ touchscreen |
Safety features | Tilt sensor, E-stop, temp alarm, water flow alarm | Same | Same | Same |
★ Most popular models. 1500W is the best-value choice for most fabrication shops. 2000W is recommended if you regularly work with 4mm+ material.
How Much Does a 3-in-1 Laser Machine Cost?
We publish real prices. No “contact for quote” games.
Model | Factory-Direct Price | Typical Dealer Price | You Save |
1000W 3-in-1 | $2,800–$3,500 | $8,000–$10,000 | ~45% |
1500W 3-in-1 | $2,500–$3,800 | $9,000–$12,000 | ~42% |
2000W 3-in-1 | $3,200–$4,000 | $11,000–$15,000 | ~40% |
3000W 3-in-1 | $3,500–$4,500 | $14,000–$18,000 | ~38% |
Application-First Equipment Selection
Prices are FOB China factory. Shipping, customs duties, and local taxes are additional.
DDP pricing to door available on request.
What is included in the price:
- Complete 3-in-1 machine unit
- Handheld welding gun with 5m fiber cable
- Wire feeder (single or dual, model-dependent)
- Cleaning nozzle kit
- Cutting nozzle kit
- Protective lenses ×5
- Focusing lenses ×2
- Laser safety goggles (OD6+, 1064nm rated)
- Laser welding helmet
- Gas adapter and hose
- Emergency stop button (external)
- Power cable
- Operation manual and preset parameter library
- Video training tutorials
- 2-year full warranty
- Lifetime technical support
You will need to supply separately: Shielding gas (argon or nitrogen, ~$30–$50/tank), filler wire (0.8–1.6mm, ~$15–$30/spool).
Why are Chihalo prices lower? We are the manufacturer. There is no distributor markup, no dealer commission, no warehouse middleman. Our machines use the same JPT laser sources found in $15,000+ Western-branded units. The difference is margin, not quality.
3-in-1 Machine vs. Buying Three Separate Machines
This is the comparison no other manufacturer shows you. Here is the real cost of buying a 3-in-1 versus three dedicated machines.
Cost Factor | 3-in-1 (2000W) | Separate Welder + Cleaner + Cutter |
Equipment cost | $3,200–$4,000 | $3,000 (welder) + $3,000 (cleaner) + $4,000 (cutter) = $10,000+ |
Floor space | 1 unit (~0.6 m²) | 3 units (~2.0 m²) |
Training time | 1–2 hours (one system) | 3–6 hours (three systems) |
Operators needed | 1 | 1–2 |
Maintenance items | 1 chiller, 1 set consumables | 3 chillers, 3 sets consumables |
Annual maintenance cost | ~$200–$400 | ~$600–$1,200 |
Warranty management | 1 supplier | 1–3 suppliers |
Total 5-year cost of ownership:
- 3-in-1: ~$3,500 + $1,500 maintenance = $6,000
- Three separate machines: ~$10,000 + $4,500 maintenance = $14,500
Savings with 3-in-1: ~$12,500 over 5 years.
When three separate machines make more sense: If you run high-volume production where each function operates simultaneously on different workstations, or if your cutting needs exceed 6mm thickness regularly, dedicated machines will deliver better throughput. The 3-in-1 is optimized for shops where the same operator handles all three tasks sequentially.
Which Power Level Is Right for You?
1000W — Entry Level
Best for: Hobby workshops, startups, thin sheet metal work (≤2mm). Handles basic welding, light rust cleaning, and cutting on thin material. Good starting point if you are new to laser welding and want to test the technology before investing more. Limitation: Struggles with material over 3mm. Slower on heavy rust.
1500W — Best Value ★
Best for: Most fabrication shops, auto restoration, kitchen/bath manufacturing. Welds up to 5mm steel, cuts up to 3mm. This is the sweet spot where capability meets cost. Handles 80% of typical fabrication work. Our recommendation for first-time buyers.
2000W — Professional ★
Best for: General fabrication, regular 4mm+ material, production environments. Welds up to 6mm, cuts up to 4mm. Noticeably faster than 1500W on thicker material. The most versatile option if budget allows. Most popular among experienced fabricators.
3000W — Heavy Industrial
Best for: Heavy repair work, agricultural equipment, thick aluminum (5mm+), high-speed production. Welds up to 8mm, cuts up to 6mm. Maximum speed and penetration. Honest assessment: Overkill for most small shops. Requires 380V power, which some facilities do not have. Worth it only if you regularly work with thick material or need maximum throughput.
Rule of thumb: When in doubt, go one power level higher than you think you need. The cost difference is $800–$1,500, but having extra capability prevents frustration when that occasional thick job comes in.
Industries and Applications
Sheet Metal Fabrication
The core use case. Weld enclosures, brackets, and frames. Clean weld seams post-welding. Trim edges and notch corners. One operator, one machine, complete workflow.
Signage & Advertising
Cut and weld stainless steel and aluminum letters, channel signs, and decorative metalwork. Precision on thin material means clean results without thermal distortion.
Automotive Repair & Restoration
Weld thin body panels (0.5–2mm) without warping — impossible with MIG. Clean rust from undercarriage and engine parts before repair. Cut away damaged sections. Shops report going from 8 completed jobs/day to 25 after switching.
General Maintenance Workshop
Every facility maintenance team handles a mix of small welding jobs, rust removal, and metal trimming. The 3-in-1 replaces a TIG welder, angle grinder, and chemical cleaning station in one unit.
Construction & On-Site Repair
The portable design (75–120 kg with wheels) goes wherever the job is. Repair handrails, gates, structural steel on-site. The cleaning function handles rust prep without carrying additional equipment.
Kitchen & Bath Manufacturing
Stainless steel sinks, countertops, commercial kitchen equipment. The fish-scale weld pattern requires zero grinding, eliminating 75% of finishing labor. Pre-weld and post-weld cleaning included.
What Is Included with Your Machine
Every Chihalo 3-in-1 machine ships as a complete, ready-to-use kit:
In the box:
- 3-in-1 main unit with JPT fiber laser source
- Handheld welding gun with 10m fiber cable
- Wire feeder (single or dual, model-dependent)
- Cleaning nozzle assembly
- Cutting nozzle assembly
- Welding nozzle set: 8 nozzles in 6 types (flat, inner corner, outer corner, wire-feed in 0.8/1.0/1.2/1.6mm)
- Protective lens ×5
- Focusing lens ×2
- Laser safety goggles (OD6+, 1064nm)
- Laser welding helmet
- Gas fitting adapter + gas hose
- External emergency stop button
- Power cable
- Safety clip
- Operation manual with preset parameter library
- Quick-start guide
Included services:
- Video training tutorials (English)
- Remote software setup assistance
- Lifetime technical support (WhatsApp, email, video call)
- 2-year full warranty (laser source + all components)
- Free sample welding before purchase
You supply: Shielding gas (argon for stainless/aluminum, nitrogen for carbon steel) and filler wire.
Why Buy from Chihalo?
Chengdu Chihalo Technology Co., Ltd. has manufactured laser equipment since 2016.
- National High-Tech Enterprise— A Chinese government certification that fewer than 3% of manufacturers qualify for
- OEM supplier to European laser brands— The same machines serve military, university, and government clients across Europe
- CE certifiedfor all international markets
- 5,000+ machines shippedto 30+ countries
- 2-year warrantycovering laser source and all components, including shipping cost for replacement parts
- Free sample welding— Send us your actual materials, we weld samples under video, you evaluate results before buying
- Factory-direct pricing— No middlemen, no dealer markup. The $15,000 machine from a Western brand often contains our $6,000 components
After-sales support:
- Dedicated WhatsApp/Skype group with our engineers for lifetime technical support
- If a part fails, replacement ships via DHL Express within 3 business days
- Remote diagnostics via video call
- On-site service available in select regions through distribution partners
Frequently Asked Questions
Factory-direct prices range from $2,800 for a 1000W unit to $4,500 for a 3000W unit. Western dealers typically charge $10,000–$18,000 for equivalent machines with the same laser sources. The price includes the complete machine, all nozzles, safety gear, wire feeder, training, and a 2-year warranty.
For most fabrication shops, yes. A 2000W 3-in-1 costs $3,800–$4,000 versus $10,000+ for separate welder, cleaner, and cutter. You also save on floor space, maintenance, and training. The exception: high-volume production lines where all three functions run simultaneously on different workstations.
Cutting thickness depends on power: 1000W cuts up to 2mm steel, 1500W up to 3mm, 2000W up to 4mm, and 3000W up to 6mm steel. Aluminum capacity is about 1mm less than steel at each power level. This is auxiliary cutting for trimming and notching — it does not replace a dedicated cutting table.
No. Most operators produce quality welds within 1–2 hours. The touchscreen controller includes preset parameters for common materials and thicknesses — select your material, set your thickness, and start welding. Compare this to 3–6 months of training for TIG welding proficiency. Switching between welding, cleaning, and cutting modes takes about 30 seconds.
Stainless steel (all grades), carbon steel, galvanized steel, aluminum alloys (6061, 5052, 1100), copper, brass, and titanium. It also handles dissimilar metal combinations like stainless-to-carbon steel. Cast iron is possible but not ideal due to cracking risk from rapid cooling.
For pre-weld and post-weld cleaning, absolutely. It removes rust, paint, oil, oxide layers, and welding discoloration efficiently. For large-area industrial cleaning (ship hulls, factory floors), a dedicated high-power cleaning machine will be faster. The 3-in-1 covers 80%+ of typical shop cleaning needs.
Choose 1500W if most of your work is on material ≤4mm thick and you want the best value. Choose 2000W if you regularly work with 4mm+ material or want maximum versatility. The cost difference is $1,000–$1,700, and the extra power provides significantly more headroom. When in doubt, go with 2000W.
Over 80% of laser welding machines sold worldwide are manufactured in China — including most units sold under Western brand names. The key is buying from a certified manufacturer. Chihalo holds National High-Tech Enterprise certification, CE certification, and has supplied OEM equipment to European laser brands since 2016. We provide a 2-year warranty covering all components including shipping for replacement parts, plus lifetime technical support.
Shielding gas: argon for stainless steel and aluminum (~$30–$50/tank), nitrogen for carbon steel. Filler wire: 0.8–1.6mm diameter (~$15–$30/spool). Protective lenses: $5–$15 each, last weeks to months depending on usage. Total consumable cost is typically under $2/hour of operation.
Standard production + shipping: 7–15 business days. Custom configurations: 15–25 business days. We offer DDP (Delivered Duty Paid) shipping to USA, Canada, and EU — you receive the machine at your door with no customs paperwork. Shipping cost varies by destination. Contact us for a complete DDP quote.
🚀 Ready to Build Your Laser Cleaning Business?
Contact Chihalo for personalized consultation: application analysis, equipment recommendations, ROI projections, and complimentary sample processing on your actual workpieces.
Tell us about your application and we’ll recommend the perfect solution:
Contact Information:
- 📧 Email: [info@chihalo.com]
- 📱 WhatsApp: [+86 18608325040]
Our technical team will respond within 24 hours with personalized recommendations and competitive pricing.